Wiring a home can be difficult at the external surface in this case the cable is laid on the surface of the wall and held by the clip or channel, in which cables pass through the PVC pipe placed in the wall. There is also a trunking surface, where the trunking PVC pipe laid on the surface of the wall and through which cables pass.
The cable used for surface cable network typically consists of 2 or 3 wires insulated. If you are looking for house electrical wiring in Australia then you can browse this link.
Cables for cable channels, on the other hand, are a single-wire insulator, to facilitate easy passage through PVC pipes. Cable channels are recommendations for neatness but care must be taken to ensure that qualified electricians hired to handle the project and that the only quality materials are used.
This is because if the result of a mistake in the case of channels, usually difficult to trace and may result in a fire outbreak.
The isolator is commonly called a wire or cable that consists of the size of the difference is measured in millimeters and is also used for different types of connections of electrical appliances. There is also a variant of aluminum and copper cables.
Because the former detainees greater and greater needs of the conductors, copper wires are recommended. The following is a general measure of wire and examples of their equipment can be used to connect:
- 1mm – light switches and sockets for electronic
- 1.5mm – lamps and other lighting devices
- 2.5mm – AC and fridge
- 4mm and 6mm – air conditioners, refrigerators, and other heavy-duty equipment
- 16mm – used to connect homes to public sources of power (PHCN)