add share buttonsSoftshare button powered by web designing, website development company in India

wall insulation installation

Insulating The Walls Of Your Home

Insulating the walls of your home this winter is very engaging to many homeowners, as the main benefit of doing so is saving on their energy bills and adding value to their home. You can also look for the best wall insulation in Perth.

Image Source: Google

Cavity Walls will have two skins of brick, or one brick and one concrete block, with a gap in between, where air circulates and so prevents water penetration. By insulting this gap will prevent air circulation, trapping the air and thereby stopping heat loss by up to 65 percent.

Insulating cavity walls, however, requires every exterior wall to be treated at the same time. Therefore, it is most effective from a cost viewpoint for homes that are heated throughout long periods. This type of insulation is not practical for a block of apartments unless the whole building is being insulated simultaneously.

For cavity walls, there are two main home insulation methods which are the dry method and the foam method.

The dry method utilizes mineral-wool fibers or expanded polystyrene beads blown through holes drilled on the outer surface of the wall until the cavity is filled and insulation is complete. This method also ensures the optimum use of materials used.

The foam method can be produced on-site and pumped through the holes burrowed on the outside wall. The foam dries after a few days and solidifies, and it should be noted for timber-framed homes.

Solid walls can be insulated in a different way, by either insulting the exterior of the walls or line the inner surface of the wall. Both of these methods can lead to the joinery, electrical, and plumbing supplies being affected.